LIFT TECH MARINE AC 110V LIFT MOTOR W/REMOTE AND AUTO STOP ACRAS-G2

Tired of cranking your lift? The Lift Tech Marine model ACRAS-G2 remote control AND key switch operated 110V powered direct drive boat lift motor is a great solution to that problem. This unit features the newest option from Lift Tech with integrated Auto Stop feature. Easy and quick to install, Lift Tech Marine motor units available in AC and DC power options are packed with design features not found with competitors.

NEW Phone App Remote Control - Lift Tech Marine's new Phone App that allows you to control your boat lift motor from your phone. Simply install the app on your phone, sync your motor and phone through a Blue Tooth connection and away you go. The app is super easy to use and has a longer reach than the key FOB remotes (which are still included). This is a great addition to the already solid Lift Tech Marine line of boat lift motors.

Unlike all other Lift Tech units, the LT-AC100-H features the Auto Stop design that automatically stops the lift at a pre-defined user setting. Allow for defined upper and lower lift setting stop points, helping you ensure that your lift isn't lowered or raised to high. Auto Stop systems also provide a red & green LED status light indicator providing the user with power status feedback.

Designed to fit a majority of manual operation freestanding lift manufacturers, this unit allows you to eliminate the hassle of turning that old round turn wheel. Once the Lift Tech motor is installed, it allows you to operate your boat hoist with the turn of a key or the push of a button on one of your key fob remote controls.

KEY FEATURES

• Equipped with NEW Auto Stop, Soft Start and Power Indicator LED
• Key Switch, Key Fob Remote Operation OR the *NEW* Lift Tech Marine Remote Phone App
• Low Maintenance
• Backwind and Upper Amp Limit Sensor Protection
• Runs on 110 volt AC (must use GFI outlet) with an average 6 - 11 amp draw
• Designed and built to handle the elements, motor cover not required.
• Heavy duty multi-tooth spline for a stronger connection to winch
• Works on freestanding mechanical lifts up to 7000 lb. capacity
• Easy and quick installation
• Optional Push Button Pendant can be added at any time to key switch models
• Backup Bit for manual operation of the unit in the event of a power outage or system malfunction
• 2 Year Warranty against manufacturer defects on all Lift Tech Marine motors.

HOW DOES THE AUTO STOP WORK?

The Lift Tech Auto Stop unit is designed to automatically stop the lift at user-defined upper and lower limits, preventing accidental over travel of the lift and any potential damage to the lift or boat itself. When the lift is commanded to go up and the lift reaches the upper limit, the lift will stop and will not allow any further upward travel. Likewise, when the lift is going down and the lower limit is hit, the lift will stop and not allow any further downward travel to occur.

If power is removed, the Lift Tech Auto Stop unit will remember the position limits, so when power is reapplied to the unit, it will function and limit as originally programmed. If for some reason the motor is moved (by use of back up bit) the position limits are no longer valid and need to be reprogrammed.

AVAILABLE ACCESSORIES

Canopy Light Option - The canopy lights offered by Lift Tech Marine are small but powerful and easily zip tie to a canopy bow on your canopy frame. The lights are constructed with a 3 LED light module (seen in image to left) mounted to an aluminum bar roughly 12" in length. The light is pre-wired and plug directly into the lift tech motor. See images in the images scroller for this product.

AC 110V Units - NOTE: water and electricity pose a potentially dangerous situation. It is highly recommended that a qualified electrician perform the installation of the power line equipped with a Ground Fault Circuit Interrupter (GFCI).

INCLUDES

• ACRAS-G2 Power drive unit
• Choice of installation mounting hardware
• Backup Bit
• 2 Keys
• 2 Key Fob Remote Controls

Installation Hardware Kits- Lift Tech offers a variety of hardware installation kits specifically designed for certain boat lift manufacturers. Hardware kits allow for the motor unit to attach to an existing mechanical reduction winch assembly. Lift Tech direct drive motors fit a majority of both new and old freestanding hoist manufacturers. During checkout please specify the brand of lift or winch model the motor will be installed on.

Fits Following Lift Brands - ShoreStation, Hewitt, Beach King, CraftLander (NuCraft), Daka, Dock Rite, Dutton Lainson 1200B, Dutton Lainson 2500/3500, Dutton Lainson B1200A, Dutton Lainson B1500A, Great Lakes Lift, Harbor Master, Lakeshore Products, Lakeside, Metal Craft, Newman, Northern Lights, Pier Pleasure, Port-A-Dock, RGC, ShoreMaster, ShoreMaster Whisper Winch, ShoreMaster Whisper Winch 2, ShoreMate, Summit, Feighner, Ridgeline and Vibo winch types.

ADDITIONAL INFORMATION

• Product ships via UPS
• Product will require a signature upon delivery due to high cost
• Tracking information will be provided via email when the shipper catalogs the pick-up