CRAFTLANDER MH-V60120 - 6,000 lb Capacity Freestanding Vertical Boat Lift

The reliable and well designed vertical lifts by CraftLander offer many of the same features found in more expensive, premium brand lines. The heavy-duty bolt-together aluminum construction provides superior environmental endurance and eliminates the need for aluminum welds while adding to the strength and stability of the lift.

This unit can be ordered in either a 120" inside lift width or in a 132" inside width. 

The MH-V60120 is the most popular 6K model and works for cruisers, wake, ski, deck, pontoons or tritoons with loaded weights less than 6000 and beam of up to 102". Or you can opt for the MH-V60132 which offers the same capacity with a little more width allowing for boats up to a 132" width. This boat lift can be custom configured for a wide variety of watercraft hull styles. Select from the above drop down options to custom configure this lift to your specific needs.

Vertical lifts by CraftLander offer many of the same features found in more expensive brand lines. The heavy-duty bolt-together aluminum construction provides superior environmental endurance and eliminates the need for aluminum welds while adding to the strength and stability of the lift. CraftLander lifts are easier to crank than most lifts on the market today due to their patented "Positive Drive Winch" that is chain driven with roller bearings. In contrast to many other lift brands that install generic third-party winches, CraftLander is one of the few manufacturers that custom designs their winch assemblies for their lifts. The 6,000 lb models have an 11:1 winch (22 turns or the wheel to 1 complete revolution of the drum) and raises about 1 inch every 2 turns of the wheel.

 

MH-V60120 FEATURES

• 6,000 lb Max Lifting Capacity
• 120" Max Beam (inside width - upright to upright)
• Stainless Steel & Brass Fasteners 
• Heavy Duty I-Beam Aluminum Lifting Platform
• Positive Drive Winch Assembly
• 60" Lift Height (actual cradle travel)
• Stainless Steel Lift Cables
• Drop V Side Frame for Easy Boat Entry
• 30" Telescoping Legs Standard

 

View Helpful Assembly Videos Here

 

This lift has been designed to be used in low and fluctuating water levels. The 60" lift height gives you a lot of cradle travel to work with and keeps you from having to move the lift to shallow or deeper water.

The 30" telescoping legs get you installed up to a 5.5-foot water depth. We can also provide extension legs to get you in up to 7' 6'' of water.

The large tapered pads or feet on this unit allow it to be moved across many different surfaces and lake bottoms without snagging or digging in. This is very helpful for seasonal installation and removal.

 

BUILD YOUR HOIST PACKAGE

This CraftLander Hoist can be equipped for virtually any watercraft style and a spectrum of lakefront conditions. With a wide variety of equipment accessories the unit can be configured to suit your needs. While choosing your hoist configuration, please review the following options that this unit can be configured with. These options are selected above and allow you to configure the new hoist to your needs.

This section provides a description of the various options that you can have this hoist equipped with. These options are selected above the "Add to Cart" button, which allows you to build the configuration that you want.

 

EXTENSION LEG OPTIONS

Freestanding Lifts such as this model utilize four, independently adjustable legs which are inserted into the corner columns of the hoist. When installed they allow you to adjust the height of the lift at each of the corners so that you can achieve a level plane across the hoist. Attached to each leg is a large base pad that will rest on the lake bottom.

 

 

BOAT SUPPORT OPTIONS

This hoist can be equipped with a variety of support hardware options. The following options are designed for particular watercraft hull designs. Boat Support options include complete hardware kits that are mounted to the moving cradle of the lift and are contact and support your boat.

     

 

LOADING GUIDE OPTIONS

Loading guides are optional accessories that can be added to your lift at any time. They are highly recommended for those in rough and windy areas or for inexperienced drivers. They are designed to assist with leaving and parking your boat, by providing a "guide" aid to keep you centrally located within the hoist frame.

 

MOTOR STOP OPTIONS

Motor Stops are another optional style of parking aid that are designed to help with parking a watercraft. Motor Stops help prevent "overshooting" the parking location. The Motor stop are not suitable for Wake and Ski Style watercraft with drive shaft prop and rudders

  

This product requires LTL freight delivery or local pickup from our location. Product assembly is required. It is recommended that this unit is assembled by experienced contractors or those experienced in boat hoist assembly and installation. Improper assembly and maintenance may void factory warranties. It is important to review and examine all assembly/use instruction guides prior to operation. Assembly instructions and lift diagrams can be found under the "Spec" tab located at the top of this page.

 

ADDITIONAL INFORMATION

• Product ships via LTL common carrier freight. Please add this product to your shopping cart and then enter your postal code for estimated shipping costs. 
• Tracking information will be provided via email when the shipper catalogs the pick-up.