CanDock Connecting Pin - Beige - A0005

SPECIFICATIONS

• Material/Composition: High-density polyethylene resin
• Available Colors: Beige, Gray, and Blue*
• Surface: Anti-skid
• Dimensions: L: 24 cm (9.6”) x W: 17.2 cm (6.88”)
• Shaft Diameter: 4.547 cm (1.819”)
• Wall Thickness: 0.075 cm (0.300”)
• Needed Tools: G2 key for pin

*Blue color availability is not guaranteed. Contact your local distributor for more information.

TERMINOLOGY

• SKU NUMBERS

  • G2 Connecting Pin Beige: A0005
  • G2 Connecting Pin Grey: A0007
  • G2 Connecting Pin Blue: A0006

• HEAD: Upper part of the connecting pins designed with a flat and anti-skid surface.

• NOTCH: Manufactured recess in the pin’s head that allows the tool to insert the key for screwing and unscrewing.

• SHAFT: Male part of our coupling system, the threaded shaft is to be inserted in our Candock sliding nuts.

ASSEMBLY PROCEDURE

1. Initiate the rotating process by hand.
2. When the connecting pin has access to the sliding nut threads, proceed by screwing manually or mechanically with the proper tools.
3. Make sure to securely tighten the connecting pins until snug, without over-tightening them.

TIPS

1. When initially inserting the connecting pins in place, you might want to firmly “tap” the pin in place. This ensures a strong “initial” grip of the shaft threads into the sliding nut. Likewise, this “tap” will help you get the pin through the four cube tabs resting on top of the sliding nut.
2. Once the assembly process is completed, align the notches of every connecting pin using the manual key. This simple operation will allow you to quickly locate any connecting pins which could have unscrewed over time.
3. Always proceed with caution if using a power drill to fasten the connecting pins. The drill can have a tendency to “kick,” so use protective footwear. If using a power drill to unscrew pins, always loosen the pins manually before using the drill.
4. Never use an “impact tool” to fasten the connecting pins, as it will surely damage the connecting pins and the assembly key for the drill as well.