Lift Tech Marine Generation 2-DC 12v/24v Key Operation Boat Lift Motor
Tired of cranking your lift? The Lift Tech Marine model DCM-G2 key switch operated 12v OR 24v powered direct drive boat lift motor is a great solution to that problem. Easy and quick to install, Lift Tech Marine motor units are available in AC and DC power options and are packed with design features not found in competitors.
Designed to fit a majority of manual operation freestanding lift manufacturers, this unit allows you to eliminate the hassle of turning that old round turn wheel. Once the Lift Tech motor is installed, it allows you to operate your boat hoist with the turn of a key or by the use of an optional corded push button pendant.
KEY FEATURES
- Equipped with Soft Start and Power Indicator LED
- Low Maintenance
- Backwind and Upper Amp Limit Sensor Protection
- Runs on 12 volt OR 24 volt DC
- Designed and built to handle the elements, motor cover not required
- Heavy duty multi-tooth spline for a stronger connection to the winch
- Works on freestanding mechanical lifts up to 7000 lb. capacity
- Easy and quick installation
- 38 to 42 RPM on 12v system and 78 to 82 RPM on 24v system
- Optional Push Button Pendant can be added to key switch models at any time
- Backup Bit for manual operation of the unit in the event of a power outage or system malfunction
- 2 Year Warranty against manufacturer defects on all Lift Tech Marine motors
SHOULD I DO 12V or 24V?
This motor allows either 12v DC (single battery) OR 24v (two batteries in series) to be used to power the unit. Both options will do the job, but the use of 24v actually doubles the speed of the motor and shortens the lift time. Take a look at the video above to see the difference in lift time between the 12v and 24v power sources. With the motors, it does not matter if you decide to go with a 12v or 24v until you get the motor, BUT if you are purchasing a solar kit, you will need to determine how your lift is powered prior to ordering a kit. The 12v and the 24v power options will require different solar panels.
Please note, if installing this unit on a boat lift with greater than 5,000lb of lifting capacity it is strongly recommended that a 24V battery configuration be used for proper performance.
Lift Tech Marine Motor Units offered by BoatLiftandDock.com are of the most recent model revision. Featuring the most up-to-date safety and design features including soft start, and backwind/overwind amp limit sensors of which are not found on other aftermarket lift motor options.
INCLUDES
- DCM-G2 Power drive unit
- 8 Foot Battery Power Cable
- Backup Bit
- 2 Keys
Installation Hardware Kits- Lift Tech offers a variety of hardware installation kits specifically designed for certain boat lift manufacturers. Hardware kits allow for the motor unit to attach to an existing mechanical reduction winch assembly. Lift Tech direct drive motors fit a majority of both new and old freestanding hoist manufacturers. During checkout please specify the brand of lift or winch model the motor will be installed on.
Fits Following Lift Brands - ShoreStation, Hewitt, Beach King, CraftLander (NuCraft), Daka, Dock Rite, Dutton Lainson 1200B, Dutton Lainson 2500/3500, Dutton Lainson B1200A, Dutton Lainson B1500A, Great Lakes Lift, Harbor Master, Lakeshore Products, Lakeside, Metal Craft, Newman, Northern Lights, Pier Pleasure, Port-A-Dock, RGC, ShoreMaster, ShoreMaster Whisper Winch, ShoreMaster Whisper Winch 2, ShoreMate, Summit, Feighner, Ridgeline and Vibo winch types.
ADDITIONAL INFORMATION
- Product ships via UPS
- Product will require a signature upon delivery due to high cost
- Tracking information will be provided via email when the shipper catalogs the pick-up
