UNIVERSAL HULL BUNK KIT

This standard hull bunk kit allows you to add full length carpeted hull bunks to your boat lift and works for lifts up to a 4500 lb capacity.  The standard kit works well for boats like runabouts, deck boats, fishing boats, and other v-hull or flat bottom boats.  This bunk kit is NOT reccommended for use with ski or wakeboard boats with underside skegs.

This kit requires the customer to provide two 2" x 6" x 10' pieces of lumber.  Our kit provides the brackets, mounting hardware and optional carpet.

INCLUDES

• 8 - Aluminum Uprights (Bars)
• 4 - Pivoting Bunk Connecting Blocks
• 12 - 1/2" Bolts and Nuts
• 8 - 3/8" Carriage Bolts, Nuts and Washers
• 4 - Nylon Spacers (5" Kit Only)
• 2 - 12' x 16" Marine Carpet Strips (Optional)

Standard kits can be ordered for multiple cross member sizes to fit many boat lifts on the market.  To determine which kit would be required for your application please measure both the width and height of the horizontal cross member where this kit attaches.

KIT OPTIONS

• 2" Kit Option: Crossmember dimensions - 2" width by 3" to 5.5" height
• 3" Kit Option: Crossmember dimensions - 3" width by 3" to 5.5" height
• 4" Kit Option: Crossmember dimensions - 4" width by 3" to 5.5" height
• 5" Kit (actual width 5.25") Option: Crossmember dimensions - 5.25" width by 5" to 6.5" height or for a ShoreStation SS26108A and SS36108A models with 5.25" I-Beam (wood removed)

IMPORTANT NOTE

This kit requires that the front and rear crossmember on the boat lift be attached to each other. This kit is not to be used on a boat house lift or piling mount lift unless the front and rear lifting beams are structural connected to each other.

ADDITIONAL INFORMATION

• Lumber is NOT Included.
• When UPS picks up the items then tracking information will be sent via email.
• For estimated shipping charges add the items to your cart and enter your zip code into the shipping calculator on the cart page.