HARBORTIME AFTERMARKET HEWITT 22' x 100" REPLACEMENT CANOPY COVER

This replacement boat lift canopy cover is designed to specifically fit existing Hewitt 22 foot long by x 100 inch width Hewitt Flared End OEM aluminum canopy frames.

Each cover order includes canopy frame attaching hardware and storage bag. 

(Canopy Frame Not Included)

HarborTime Edge is an improvement of the original HarborTime fabric and features Perfecta Marine technology. The canopy covers are lighter-weight covers that have exceptional heat reduction, heat reflection and UV defense. Which means cooler surfaces and lower interior temperatures. The 12oz per yard fabric makes it easier to remove and install than traditional vinyl covers and the fabric is stabilized to ensure a continuous fit.

COVER DETAILS

• Includes 12oz HarborTime® Edge lift canopy cover and attachment hardware (canopy frame not included)
• Quiklash reinforced lacing canopy attachment system eliminates grommets, 25% stronger than traditional grommet system
• Quiklash webbing features UV and Mildew resistance for longer-lasting durability and strength
• Hot air rotary heat sealed and welded 1" overlapped seams on top panels and 1/2" on canopy ends
• Coats Dabond bonded and twisted continuous filament polyester threading with high UV and water resistance 
• Exceptional UV performance and water repellency
• Includes a 5-year limited manufacturer's warranty
• 10" Valance Length

HarborTime® Available Colors

HarborTime® Canopy Covers are available in 10 different color options.

QUICKLASH CANOPY ATTACHMENT SYSTEM

When you order a new replacement canopy cover, we include Bungee Attaching Hardware so that you can secure the cover to your canopy frame.  Below is an overview of the attachment system present with cover options as described above.

 

The Quicklash canopy attachment system provides a user-friendly and easy to install design with increased strength and durability over traditional attachment systems.  Sewn into the interior of the cover, Quicklash is a fabric strip with reinforced lacing holes to eliminate the need of grommets to secure the canopy.  The Quicklash webbing is reinforced with Armor Bar, a high-tenacity polyester yarn which provides increased tear resistance and strength.

 

The 2-1/8" wide Quicklash webbing allows for quick and customizable installation with 1" lacing holes spaced every 3".  The canopy cover is secured utilizing the Quicklash webbing and supplied bungees.  The 1/4" stretchable, nylon covered, rubber bungees connect to any of the 1" lacing holes and then are secured to each specified attachment point on the existing canopy frame.  Once all bungees have been installed even tension is created around the perimeter of the canopy frame keeping the cover secure and in place on the frame.

HEWITT CANOPY FRAME MEASURING ASSISTANCE

FLARED END CANOPY FRAME DESIGN: ROUNDED CORNERS

Below we have provided an image that illustrates how to measure your Flared End canopy frame in order to determine the proper size cover. Hewitt canopy frames will have either a flared-rounded end or flat end frame design. Flared frames are slightly peaked to the center of the frame and have rounded/flared frame end corners and are most typically found on frames of 22 ft in length or longer. Typically, above the lower canopy rail in the interior of the frame is a flat bar or a welded tie bar running the length of the frame for bungee attachment. Canopy ribs normally sit on top of a 3 inch by 3 inch square side frame tube. Washers are typically welded on the ends for tie-down attachment.

• Length Measurement: Outside length along the center of the frame from front to back. Lengths are in 2-foot increments.
• Width Measurement: Outside width of the lower canopy rail on a centerline from left to right.

Important Note: Canopy covers are custom and built to order, each specific to the frame make and size. It is important that the correct make and size canopy cover is ordered. Canopies returned due to incorrect size or make ordering errors are subject to restocking fees and in some cases may not be returnable. If replacing an existing cover, check for a canopy tag for size information or contact the canopy frame manufacturer. If you have any fit-related questions after reviewing the measuring instructions, please contact us. If contacting us for sizing assistance, please have images of the canopy frame in question available and measurements as outlined above.