28' x 110" Hewitt Shelter-Rite Cover-HEW28110V

Aftermarket Hewitt 28' x 110" replacement Shelter-Rite boat lift canopy covers are designed to specifically fit existing Hewitt 28' x 110" canopy frames. Each comes complete with canopy frame cover, attaching hardware and storage bag.

Shelter-Rite™ vinyl is a American Premium Fabric. Shelter-Rite vinyl is engineered to exceed extensive performance criteria and is recognized as by most in the industry as the best all vinyl canopy material available. Shelterite is a heavy duty 18oz PVC coated polyester. Shelter-Rite vinyl canopies outperform many other vinyl materials such as Shur-Tuff, Cover Tuff, Stamoid, in many key attributes.

Heavy duty tightly woven polyester fibers provide excellent tear, puncture & abrasion resistance. A high performance vinyl formulation keeps the vinyl pliable, crack and peel resistant, UV, mold, and mildew resistant. The 18 oz weight combined with heat sealed welded seams make Shelter-Rite vinyl the most durable and number one used vinyl in the marine industry. Flat matte, RWooth finish makes clean up very easy.

COVER DETAILS

• Includes 18.8oz Shelter-Rite lift canopy cover and attachment hardware (canopy frame not included)
• Quiklash reinforced lacing canopy attachment system eliminates grommets, 25% stronger than traditional grommet system
• Quiklash webbing features UV and Mildew resistance for longer-lasting durability and strength
• Hot air rotary heat sealed and welded 1" overlapped seams on top panels and 1/2" on canopy ends
• Coats Dabond bonded and twisted continuous filament polyester threading with high UV and water resistance 
• Includes 5-year limited manufacturer's warranty

Shelter-Rite Available Colors

Shelter-Rite Canopy covers are available in nine color options . Below are color samples of the available colors Burgundy, Forest, Tan, White, Blue, Gray, Yellow, Red and Black.

QUIKLASH CANOPY ATTACHMENT SYSTEM

The Quiklash canopy attachment system provides a user friendly and easy to install design with increased strength and durability over traditional attachment systems. Sewn into the interior of the cover, Quiklash is a fabric strip with reinforced lacing holes to eliminate the need of grommets to secure the canopy. The Quiklash webbing is reinforced with Armor Bar, a high-tenacity polyester yarn which provides increased tear resistance and strength.

The 2-1/8" wide Quiklash webbing allows for quick and customizable installation with 1" lacing holes spaced every 3". Canopy cover is secured utilizing the Quiklash webbing and supplied bungees. The 1/4" stretchable, nylon covered rubber bungees connect to any of the 1" lacing holes and then secured to each specified attachment point on the existing canopy frame. Once all bungees have been installed even tension is created around the perimeter of the canopy frame keeping the cover secure and in place on the frame.

HEWITT CANOPY FRAME MEASURING ASSISTANCE

FLARED END CANOPY FRAME DESIGN: ROUNDED CORNERS

Below we have provided an image that illustrates how to measure your Flared End canopy frame in order to determine the proper size cover. Hewitt canopy frames will have either a flared-rounded end or flat end frame design. Flared frames are slightly peaked to the center of the frame and have rounded/flared frame end corners and are most typically found on frames of 22 ft in length or longer. Typically, above the lower canopy rail in the interior of the frame is a flat bar or a welded tie bar running the length of the frame for bungee attachment. Canopy ribs normally sit on top of a 3 inch by 3 inch square side frame tube. Washers are typically welded on the ends for tie-down attachment.

• Length Measurement: Outside length along the center of the frame from front to back. Lengths are in 2-foot increments.
• Width Measurement: Outside width of the lower canopy rail on a centerline from left to right.

Important Note: Canopy covers are custom and built to order, each specific to the frame make and size. It is important that the correct make and size canopy cover is ordered. Canopies returned due to incorrect size or make ordering errors are subject to restocking fees and in some cases may not be returnable. If replacing an existing cover, check for a canopy tag for size information or contact the canopy frame manufacturer. If you have any fit-related questions after reviewing the measuring instructions, please contact us. If contacting us for sizing assistance, please have images of the canopy frame in question available and measurements as outlined above.